NOTE:
The ECU values Oil pressure, Coolant temperature and Fuel level can be configured as source values
for the controller analog inputs 1, 2, 3 instead of physical terminals. In that case, all analog input-
related things like protections, switches, etc. work the same way as if physical terminals are used.
In case there is valid value of Running Hours (Engine Hours) coming from ECU, controller will prefer
that value instead of internal calculation
Data sent to the ECU (if supported by the particular ECU)
ECU alarms
Alarms (diagnostic messages) are read from the ECU and displayed in the ECU Alarmlist
Supported ECU types
SUPPORTED ECU (ENGINE) TYPES AND THEIR REMOTE CONTROL CAPABILITIES
To Next Page
Loading...
Need help?
General
