ComAp InteliDrive DCU Industrial - Page 172

InteliDrive DCU Industrial 3.4.0 Global Guide
172
Related FW 3.4.0 Related applications AS, SS
Comm object 157
Description
Engine “edge sensitive” stop request. The first edge changes engine state from running to cooling, the
second edge stops engine (skip the rest of cooling). Binary input is inactive in LOC (Local) mode.
Remote Stop signal is equivalent to ID-DCU Industrial front panel Stop button.
Note: Binary inputs Remote Start and Remote Stop are edge (not level) sensitive. Minimal pulse
duration to safely detect the edge is at least the 120 ms (binary input sampling rate is 100 ms).
Remote Stop
6 back to List of LBI
Related FW 3.4.0 Related applications PRP
Comm object 158
Description
Remote engine start with cranking attempts according to Crank Attempts (page 118).
RemRepStart (PRP only)
6 back to List of LBI
Related FW 3.4.0 Related applications AS, SS
Comm object 837
Description
Active signal inhibits automatic DPF filter regeneration.
Reg Inhib
6 back to List of LBI
Related FW 3.4.0 Related applications AS, SS
Comm object 836
Description
Active signal inhibits automatic DPF filter regeneration.
RegenForce
6 back to List of LBI