ComAp InteliDrive DCU Industrial - Page 195

InteliDrive DCU Industrial 3.4.0 Global Guide
195
Related FW 3.4.0 Related applications AS, SS
Comm object 1942
Description
Provides feedback information that command (LBI function) REGENINHIBIT (PAGE 212) is active
CMD RegInhOn
6 back to List of LBO
Related FW 3.4.0 Related applications AS, SS
Comm object 17
Description
TThe output is closed in controller OFF mode.
OFF Mode
6 back to List of LBO
Related FW 3.4.0 Related applications PRP, AUX, HRB
Comm object 9887
Description
PRP Mode (PRP only) The output is closed in controller PRP mode.
AUXMode (AUX only) The output is closed in controller AUX mode.
HRB Mode (CMB only) The output is closed in controller HRB mode.
Controller mode
6 back to List of LBO
Related FW 3.4.0 Related applications AS, SS
Comm object 258
Description
The output is closed, if LOC (Local) mode is not selected.
Not In LOC
6 back to List of LBO
Related FW 3.4.0 Related applications AS, SS
Comm object 259
Description
The output is closed, if LOC (Local) mode is selected.
In LOC
6 back to List of LBO