ComAp InteliDrive DCU Industrial - Page 197

InteliDrive DCU Industrial 3.4.0 Global Guide
197
Related FW 3.4.0 Related applications AS, SS
Comm object 39
Description
The output closes during engine start, after Idle time setpoint elapses. The output opens again after Cooling
time is finished. The opposite NOMINAL/IDLE (PAGE 204) is available as well.
Note: Connect NOMINAL/IDLE (PAGE 204) to electronic speed governor to switch the speed: opened =
IDLE, closed=RATED.
Idle/Nominal
6 back to List of LBO
Related FW 3.4.0 Related applications AS, SS
Comm object 1373
Description
Indicates High Exhaust System Temperature (HEST). It may be active during DPF regeneration to indicate
higher than normal exhaust temperatures.
HESTLamp
6 back to List of LBO
Related FW 3.4.0 Related applications AS, SS
Comm object 24
Description
Closed output energizes the engine starter.
Starter
6 back to List of LBO