ComAp InteliDrive DCU Industrial - Page 271

InteliDrive DCU Industrial 3.4.0 Global Guide
271
Value group Info Related FW 3.4.0
Resolution [units] [-]
Comm object 8480 Related applications AS, SS
Description
Type of application / configuration used with controller.
Application
6 back to List of values
Value group Info Related FW 3.4.0
Resolution [units] 1 [-]
Comm object 8707 Related applications AS, SS
Description
Firmware branch code. Contains 1 in case of standard branches.
SW Branch
6 back to List of values
Value group Info Related FW 3.4.0
Resolution [units] 1 [-]
Comm object 9887 Related applications AS, SS
Description
This value contains actual controller mode. The controller mode is selected by Mode ID (page 103) but the
setpoint can be overridden by REMOTE OFF (PAGE 168).
Mode ID
6 back to List of values
Value group Info Related FW 3.4.0
Resolution [units] 1 [-]
Comm object 10040 Related applications AS, SS
Description
Code of the currently running system process timer. The text representation of each code can be obtained by
the procedure described at the value Engine state.
Timer Text
6 back to List of values
Value group Info Related FW 3.4.0
Resolution [units] 1 [s]
Comm object 8955 Related applications AS, SS
Description
The value contains remaining time of the currently running system process timer.
Timer Val
6 back to List of values