Commander Connect Owners Manual
111
To Program DDI numbers with names and have them ring Stations
If your switch is equipped with P-P Accesses then you can program DDI numbers.
• From the Programming Station, press the PROGRAM Key
• Press the Scroll Down Key () until ‘System programming’ is displayed
• Select ‘System programming’
• Enter the System Programming Password
• Select ‘Lines’
• Press the Scroll Down Key () until ‘DDI programming’ is displayed
• Select an Index from 001-100. All currently programmed indices are also shown
• Enter the DDI telephone number (as supplied by your Network Provider). A total of
fifteen digits can be entered
• Select ‘Confirm’.
• Enter a name as described on page 16 and press Confirm
• Select ‘Day Mode’, ’Night Mode” or ”Day and Night Mode”
• Select the Station or Group the DDI Number is to call
• Once Selected press ‘Confirm’.
To Program MSN numbers with names and have them ring Stations
If your switch is equipped with P-MP Accesses then you program MSN numbers:
• From the Programming Station, press the PROGRAM Key
• Press the Scroll Down Key () until ‘System programming’ is displayed.
• Select ‘System programming’
• Enter the System Programming Password and select ‘Lines’
• Press the Scroll Down Key () until ‘ISDN programming’ is displayed
• Select ‘MSN Programming’. Only Accesses programmed as P-MP appear in this menu
• Select an Access
• Indices 01-10 are presented for Access 1, Indices 11-20 for Access 2 up to Indices 71-
80 for Access 8. Either select an entry or dial the index
• Enter the MSN telephone number (as supplied by your Network Provider). A total of
fifteen digits can be entered
• Select ‘Confirm’
• Enter a name as described on page 16 and press Confirm
• Select ‘Day Mode’, ’Night Mode’ or ’Day and Night Mode’
• Select the Station or Group the MSN Number is to call. The call can also be answered
by either Auto-Attendant or Courtesy service by selecting the option at this stage.
Press the Hands-free Key to finish programming.
Note: CLI Store routing will take precedence over MSN/DDI routing or normal call routing.
Refer to page 37 for information on CLI Store.
To Next Page
Loading...