Commander Connect Owners Manual
25
Holding conference calls
This feature allows you to hold a three-way conversation between three Stations, or between
two Stations and an Exchange Line, or between two exchange Lines and a Station.
To hold an Internal Conference
• When on a call, press the Scroll Down Key () until ‘Internal Conference’ is displayed
• Select ‘Internal conference’
• Select the Station to be included in the conference
• When the Station answers, select ‘Conference’ on the 'Display'.
To hold an External Conference
• When on a call, press the Scroll Down Key () until ‘External Conference’ is displayed
• Select ‘External conference’
• Select a free Line and dial the external number
• When the call is answered, select ‘Conference’ on the 'Display'.
Note: An external conference call ties up two exchange lines. Such calls are called trunk-to-
trunk calls.
Note: At the start of a conference call a single tone is presented to all parties to indicate that the
call is a conference call.
From a standard telephone, press R when on a call, place
the second call and when it is answered, dial R3.
Using your Keystation with a headset
Your Keystation is equipped with a socket for a Headset. To manually program Headset Mode
see page 48. When you plug the headset into the socket a prompt ‘Turn Headset On?' is
presented on the display.
Select ‘Turn Headset On?'. The phone is now programmed to operate with a headset.
'Turn Headset Off?' is now displayed to allow you to revert to Keystation mode.
To make an internal or external call when using a headset
• Press the Hands-free Key and dial your calls in the normal way.
To clear down (end) a call when using headset
• Press the Hands-free Key.
To answer a call when using a headset
• Select the ‘Answer the call’ option on the 'Display', or press the Hands-free Key.
To Next Page
Loading...