Commander Connect Connect V6 - Programming Reference; Individual Station Programming Options

Commander Connect Owners Manual
124
Programming Reference
Individual Station programming options
All Stations have access to a set of options that can be programmed to suit the individual
user’s requirements. You access these programming options via the PROGRAM Key on the
Keystation.
From the Station you wish to customise, press the PROGRAM Key
The following screens show what appears when the Key is pressed. The menu options
displayed, apart from ‘System programming’, can be accessed and programmed from any
Station and are used to configure the individual Station.
1. 2.
– STATION SETUP –
- Auto answer
- Key programming
- Headset mode
– STATION SETUP –
-Ringing options
-Contrast options
-System programming
3.
– STATION SETUP –
-Background Music
- INT STN Order
- Exit
Feature
Default
Notes
Auto Answer
• Set Auto Answer
• Cancel Auto answer
Auto Answer off
See page 46.
Key programming
Keys select lines (if lines connected)
See page 46.
Headset mode
• Headset on
• Headset off
Headset mode off
See page 47.
Ringing options
• Tone 1
• Tone 2
• Tone 3
• Tone 4
• Tone 5
• Tone 6
Tone 1
See page 47.
Contrast options
• Level 1
• Level 2
• Level 3
• Level 4
Level 3
See page 47.
Background Music
Background Music Off
See Page 48
INT STN Order
Physical order
See page 48