Commander Connect Connect V6 - To Supply Music, Tone or Silence to Callers on Hold; Hot Line; To Have a Station Dial a Number Automatically, When the Handset Is Lifted

Commander Connect Owners Manual
59
To supply music, tone or silence to callers on hold
• From the Programming Station, press the PROGRAM Key
• Press the Scroll Down Key () until ‘System programming’ is displayed
• Select ‘System programming’
• Enter the System Programming Password and select ‘System’
• Press the Scroll Down Key () until ‘Music on Hold’ is displayed
• Select ‘Music on hold’
• Select the option (‘Internal Source’, ‘External Source’, ‘Tone on Hold’ or ‘Silence’) that
you want. The default is ‘Internal Source’ and the ♦ indicates the current program
setting. Internal callers are always returned ‘Tone on Hold’.
• If no Options Module is fitted and External Source is selected, the station menu is
displayed.
• Select the Station that the music source is to be connected to. The selected Station will
be indicated by a ♦
Press the Hands-free Key to finish programming.
Hot Line
Stations can be programmed so that they automatically dial a number when they go off-hook.
The number dialled can be a Station or an external number.
To have a Station dial a number automatically, when the Handset is
lifted
• From the Programming Station, press the PROGRAM Key
• Press the Scroll Down Key () until ‘System programming’ is displayed
• Select ‘System programming’
• Enter the System Programming Password and select ‘Stations’
• Press the Scroll Down Key () until ‘Hot line’ is displayed
• Select ‘Hot line’
• Select the Station from the Station Menu
• Enter the number to be dialled. If you wish to dial an external number, enter 0, or
another Line access code, before the external telephone number, to select a Line.
Press the Hands-free Key to finish programming.
Note: When a Keystation is programmed as a Hot Line, no other facilities can be invoked after it
is programmed. As soon as you go off-hook on the Keystation, the number is dialled.
Note: A common application for the Hot Line feature is for a fax or modem. The Station can
be set to automatically select an exchange Line so the fax or modem does not have to dial 0.
Note: Hotline facility can not be programmed on station 20.