Commander Connect Owners Manual
29
Additional call features
Redial
Use the Redial feature to redial the external number you most recently dialled. A Line is
selected automatically.
To redial the last external number dialled
• From the Idle Menu, select ‘Redial last number’.
From a standard telephone, the code is 77.
Saved Number Redial
In addition to the Last external number the previous 5 numbers dialled are also stored and may
be redialled.
• From the Idle Menu, select ‘Saved Numbers’
• Select the number to be dialled.
From a standard telephone the codes are 781 – 785 for saved numbers 2 - 6. The first saved
number is the Last Number Redial code 77.
Note; By dialling the code 78, the scroll up and down key can be used to view all the locations
in location sequence. When a number is redialled, it uses the same Outgoing Group as used
on the original dialling occasion.
Call Pick-up
You can group Stations as detailed below:
You can pick up any call, internal or external, that is ringing at another Station provided both
Stations are programmed in the same Group. See Group Programming on Page 53.
For Stations not in your Group you can pick up external but not internal calls. You can also
pick up an external call that is ringing on a Central Bell.
To pick up a call ringing at another Station in your Group
• From the Idle Menu, select the ‘Call Pick-Up’ option on the 'Display'.
From a standard telephone, the code is 727.
To pick up an external incoming call
• Select ‘External call pick-up’.
Note: This feature will not work for internal calls.
From a standard telephone, the code is 726.
Ring Back
If the Station you call is busy, use the Ring Back feature to have the Station call you back when
it becomes free. If you dial for an Exchange Line and no lines are free, use the Ring Back
feature to receive an Exchange Line as soon as one is available.
To Next Page
Loading...