Commander Connect Owners Manual
73
Turning Remote Notification on and off
• Press the MESSAGE key.
• Select “Voice Messaging”.
• Enter your Station number (which is your voice mailbox number).
• Enter your voice mail password (1111 by default) followed by #.
• Select “Remote Notification”.
• Turn remote notification on or off as required.
From a standard phone, dial 41 to turn remote notification on and 42 to turn it off.
Selecting the Stations that can activate Remote Notification
In default no station can set remote notification. Those Stations that can set remote notification
are programmed in system programming.
• From the Programming station, press the PROGRAM key.
• Press the Scroll Down key () until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password
• Select “Stations”.
• Scroll down and select “Remote Notification”.
• Select the Stations that are to be allowed to record calls.
Selecting the Number of Simultaneous Calls
The number of simultaneous remote notification calls can be set at 1 or 2.
• From the Programming station, press the PROGRAM key.
• Press the Scroll Down key () until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password
• Select “System”.
• Scroll down and select “Remote Notification”.
• Select “Simultaneous Calls”.
• Enter the value 1 or 2 and press “Confirm”.
Selecting the Number of Retry Attempts
The number of simultaneous remote notification calls can be set at 1 or 2.
• From the Programming station, press the PROGRAM key.
• Press the Scroll Down key () until “System Programming” is displayed.
• Select “System Programming”.
• Enter the System Programming Password
• Select “System”.
• Scroll down and select “Remote Notification”.
• Select “Retry attempts”.
• Enter the value from 2 to 15 and press “Confirm”.
To Next Page
Loading...