Commander Connect Connect V6 - Making and Answering Calls; To Make an External Call; To Make an Internal Call; To Answer a Call

Commander Connect Owners Manual
27
Making and answering calls
To make an external call
• Lift the Handset, or use a Hands-free Key, if available on your telephone
• Obtain a free Line in one of the following ways:
• Dial 0, (to select a Line from Outgoing Group 1)
• Dial 760 - 769 (to select a Line from Outgoing Groups 2 - 11 respectively)
• Dial the number you require.
To make an internal call
• Lift the Handset, or use a Hands-free Key, if available on your telephone
• Dial the desired Station number (20 - 59).
To answer a call
• When the telephone rings, lift the Handset, or use a Hands-free Key if available on
your telephone.
Holding and transferring calls
To place a call on hold
• Press the Recall Key (R) on your telephone.
If you replace the Handset, you can continue to use your telephone. The held call will call
back within 90 seconds provided your telephone is idle. If you are busy on the telephone after
the 90 seconds the call will ring when the Handset is replaced. To retrieve the call placed on
hold, lift the Handset and dial the code 719.
To transfer a call
• Press the Recall Key (R) on your telephone
• Dial the Station number and replace the Handset.
To make an external consultation call
While on an external call you can contact another Station to make an enquiry, as follows:
• While on an external call, press the Recall Key (R) on your telephone
• Dial the Station number
• To return to the external call and place the Station on hold, press R and dial 2
• To return to the external call and release the Station press R and wait, or press R
and dial 1
• To transfer the external call to the Station replace the Handset when talking to the
Station with the external call on hold.