Commander Connect Owners Manual
62
To allow Stations use System Speed Dials overriding call restrictions
You may wish to allow Stations to dial numbers entered in the System Speed Dial list, which
they are restricted from dialling directly. For example, these could be numbers that Stations in
Classes 2, 3 or 4 cannot dial directly. Entering these numbers into the System Speed Dial list
and activating this feature on the Stations allows the restricted Stations to access these
numbers.
By default, this feature is not activated on any Station.
• From the Programming Station, press the PROGRAM Key
• Press the Scroll Down Key () until ‘System programming’ is displayed
• Select ‘System programming’
• Enter the System Programming Password and select ‘Stations’
• Press the Scroll Down Key () until ‘Sys. Speed no. override’ is displayed
• Select ‘Sys. speed no. override’
• Select the Stations on which you wish to activate the feature. Those Stations allowed to
dial System Speed Dial numbers not normally appropriate to their Class of Service are
indicated by a ♦.
Press the Hands-free Key to finish programming.
Note: Numbers on a Station’s Personal Speed Dial list cannot override the Class of Service
restriction of the Station.
To Next Page
Loading...