Compaq LTE Elite User Manual

computer back on.
---------------------------------------------------------------------------
Internal display Display function was Press the Fn + F4 keys to
is blank and the switched to the external activate the internal
screen on an monitor. display. Press the keys
external monitor again to display information
displays simultaneously. **
information.
---------------------------------------------------------------------------
Distorted or The ANSI.SYS driver is Add the ANSI.SYS driver to
garbled not in the CONFIG.SYS the CONFIG.SYS file. Add the
characters on the file or the path is following line:
display are mixed incorrect.
with text. DEVICE=C:\ANSI.SYS
-------------------------------------------------------
An Energy Star monitor Deselect Energy Star monitor
is selected when one is in Power Management.
not connected.
---------------------------------------------------------------------------
Internal display Using 800 X 600 or Restart the computer. If
flashes or has higher resolution simultaneous display is
garbled on external monitor and desired, use 640 x 480
characters when have toggled back to resolution. **
computer is internal display, which
connected to only supports 640 X 480
external monitor. resolution.
===========================================================================
Problem Probable Cause Solution(s)
===========================================================================
Internal display External monitor was Turn the computer off and
and external connected after the connect the external
monitor do not computer was turned on. monitor. Turn the external
display monitor on, then turn on the
information computer.
simultaneously.
** Press the Fn + F4 keys to
"toggle" through the three
display possibilities.
---------------------------------------------------------------------------
The light tubes Improper backlight or 1. Reseat the display cable
on the edge of display cable to the system board.
the display panel connections. 2. Reseat the display cable
do not light up to the inverter board.
at all and Power- 3. Reseat the backlight
On-Self-Test cable to the inverter
(POST) completes board.
when the unit
is powered up.
***
-------------------------------------------------------
Defective inverter Replace the inverter board.
board. ****
-------------------------------------------------------
Defective display cable. Replace the display cable.
****
-------------------------------------------------------
Defective display panel. Replace the display panel.
****
-------------------------------------------------------
Defective system board. Replace the system board.

Compaq LTE Elite Specifications

General

Brand	Compaq
Model	LTE Elite
Category	Laptop
Language	English