90
44000-UG-01-01-EN_CPI_Paypod Embedded Pay Station_User Guide_V1.1.pdf
Paypod™ Embedded Pay Station
Handling Cash
Published by CPI
1 If necessary, wait until a transaction has been fin-
ished.
2 On the main screen of the POSlinq™ middle-
ware select the Administration tab[A] and then
Transfer to Cash Box[B].
The transfer to cash box screen is displayed:
Opening POSlinq™ Transfer to Cash Box Screen
Starting Banknote Transfer to Cash Box
POSlinq™ Transfer to Cash Box Status Screen
3 Tap the Transfer icon[C] to start banknote transfer from all recycling units available and the E24loading unit to
the banknote cash box. (Depending on configuration, banknotes may also be dispensed through the insertion/re-
turn slot.)
This can take a few minutes. A status window traces the process and enables you to Quit the Operation.
Most of the applications require a minimum stock of banknotes to remain in the recycling unit(s) for
the next day.
This minimum stock varies depending on the configuration and will not be transferred to the cash
box and would have to be dispensed banknote by banknote .
As soon as all banknotes are transferred, the middleware returns to the Administration screen.
4 Tap the X button to close screen[D].
The pay station is back in operating mode and ready for the next transaction.
The recycling units' counters are reset[1] and the cash box counter is increased[2].
Closing Administration Screen
POSlinq™ Stocks Screen with Banknote Recycling Capacity and Cash
Box Content
52
84
To Next Page
Loading...