CHAMP-AV8 (VPX6-462) HARDWARE USER’S MANUAL CURTISS-WRIGHT
II PROPRIETARY 826448 VERSION 5 MARCH 2015
VERSION HISTORY
Version By Date Description
1 JP July 2011 First release.
2 TM September 2012 Updated document template.
Updated section, “General Description” on page 1-2.
Updated section, “Feature Summary” on page 1-3.
Updated Figure 1.2, “CHAMP-AV8 Functional Block Diagram,” on page 1-5.
Updated “Quad-Core Intel Core i7 Processors” on page 1-6.
Updated Figure 1.3, “CHAMP-AV8 PCI Express Distribution,” on page 1-7.
Updated section, “PCI Express Architecture” on page 1-7.
Updated Table 1.1 on page 1-8.
Updated Figure 1.5, “CHAMP-AV8 SRIO Port Connections,” on page 1-11.
Updated section, “Core Functions FPGA” on page 1-12.
Updated section, “Double Data Rate (DDR3) SDRAM with ECC” on page 1-13.
Updated section, “Protected Boot Flash Memory” on page 1-14.
Updated section, “NAND Flash Memory” on page 1-14.
Updated section, “Non-Volatile RAM (NVRAM)” on page 1-15.
Updated section, “Interrupt Controller” on page 1-24.
Updated section, “Specifications” on page 1-31.
Updated Table 1.8, “CHAMP-AV8 Weight,” on page 1-33.
Updated Table 1.9, “VPX6-462-A Air-Cooled Ruggedization Levels,” on page 1-34.
Updated section “Mezzanine Module Power Considerations” on page 2-5.
Updated Table 2.2, “Maximum Supply Current for XMC Site,” on page 2-5.
Updated section “Installation Checklist” on page 3-3.
Updated section “Choose a VPX Slot Location” on page 3-4.
Replaced Figure 3.2, “System Boot Screen,” on page 3-11.
Updated section “Display the Initial Screen Message” on page 3-13.
Replaced Figure 3.3, “GRUB Loading Message,” on page 3-13.
Updated section, “Troubleshooting” on page 3-14.
Updated Table 3.7, “Summary of LED Behavior,” on page 3-15.
Updated Appendix A, "Connector Pin Assignments".
Added Appendix B, "Statement of Memory Volatility".
Added Appendix C, "Memory Write Protection".
3 JP February 2013 Updated Figure 1.2, “CHAMP-AV8 Functional Block Diagram,” on page 1-5.
Updated section “PCI Express Architecture” on page 1-7.
Updated Table 1.1, “XMC/Expansion Plane Interface Build-Time Options for PCIe,” on page 1-8
Added Figure 1.4, “PCIe Switch Partitions,” on page 1-9.
Updated section “SRIO Fabric” on page 1-10.
Updated section “XMC Site” on page 1-15.
Updated section “RTC/CMOS RAM Backup Power” on page 1-24.
Updated Table 1.6, “Power Requirements,” on page 1-32.
Updated section “Continuum IPC™ Library” on page 1-40.
Updated section “Detailed Power Requirements” on page 2-3.
Updated Table 2.1, “Voltage and Current Requirements,” on page 2-3.
Updated “XMC I/O” on page 2-4.
Updated “XMC Site” on page 2-4.
Updated section “Mezzanine Module Power Considerations” on page 2-5.
Updated section “VITA 46 P1 Fabric Connector” on page A-9.
Updated Table A.4, “P0 Utility Connector Signal Definitions,” on page A-15.
Updated Table A.39, “RTM SW2–SW18 Functions,” on page A-57.
4 JP June 2013 Updated “Configuring Jumpers” on page 2-7.
Updated Table A.39, “RTM SW2–SW18 Functions,” on page A-57.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General