D-Link DFL-260E

Context Parameters
ALG Module Name
2.1.240. failed_to_modify_sat_request (ID: 00200561)
Default Severity
ERROR
Log Message
SIPALG: Failed to modify the SAT request
Explanation
Failed to modify requst ip to SAT destination IP in the [method]
request.
Gateway Action
drop
Recommended Action
None.
Revision
1
Parameters
method
from_uri
to_uri
srcip
srcport
destip
destport
Context Parameters
ALG Module Name
2.1.241. max_pptp_sessions_reached (ID: 00200601)
Default Severity
WARNING
Log Message
PPTPALG: Maximum number of PPTP sessions (<max_sessions>) for
service reached. Closing connection
Explanation
The maximum number of concurrent PPTP sessions has been reached
for this service. No more sessions can be opened before old sessions
have been released.
Gateway Action
close
Recommended Action
If the maximum number of PPTP sessions is too low, increase it.
Revision
1
Parameters
max_sessions
Context Parameters
ALG Module Name
2.1.242. failed_create_new_session (ID: 00200602)
Default Severity
CRITICAL
Log Message
PPTPALG: Failed to create new PPTPALG session (out of memory)
Explanation
An attempt to create a new PPTPALG session failed. The unit has run
out of memory.
2.1.240. failed_to_modify_sat_request
(ID: 00200561)
Chapter 2. Log Message Reference
130