D-Link DFL-260E

Log Message
Voltage monitor <index> (<name>) is outside the specified limit.
Current value is <current_voltage> <unit>, lower limit is <min_limit>,
upper limit is <max_limit>
Explanation
The powersupply of this unit may be failing.
Gateway Action
none
Recommended Action
Change powersupply unit.
Revision
1
Parameters
index
name
unit
current_voltage
min_limit
max_limit
2.16.4. voltage_normal (ID: 04000022)
Default Severity
WARNING
Log Message
Voltage monitor <index> (<name>) is outside the specified limit.
Current value is <current_voltage> <unit>, lower limit is <min_limit>,
upper limit is <max_limit>
Explanation
The sensor reports that the voltage value is back in the normal range.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
index
name
unit
current_voltage
min_limit
max_limit
2.16.5. fanrpm_alarm (ID: 04000031)
Default Severity
WARNING
Log Message
Fan RPM monitor <index> (<name>) is outside the specified limit.
Current value is <current_fanrpm> <unit>, value is <current_fanrpm>
<unit>, lower limit is <min_limit>, upper limit is <max_limit>
Explanation
The fan is behaving strange, this may because it is failing or blocked.
Gateway Action
none
Recommended Action
Unblock or change the corresponding fan.
Revision
1
2.16.4. voltage_normal (ID: 04000022) Chapter 2. Log Message Reference
222