Default Severity
NOTICE
Log Message
Maximum processing memory limit reached
Explanation
The reassembly subsystem has reached the maximum limit set on its
processing memory. This will decrease the performance of connections
that are processed by the reassembly subsystem.
Gateway Action
drop
Recommended Action
Consider increasing the setting Reassembly_MaxProcessingMem.
Revision
1
2.33.8. maximum_connections_limit_reached (ID:
04800010)
Default Severity
NOTICE
Log Message
Maximum connections limit reached
Explanation
The reassembly subsystem has reached the maximum number of
concurrent connections.
Gateway Action
none
Recommended Action
Consider increasing the setting Reassembly_MaxConnections.
Revision
1
Context Parameters
Connection
2.33.9. state_memory_allocation_failed (ID: 04800011)
Default Severity
ERROR
Log Message
Failed to allocate the memory needed to activate reassembly on a
connection
Explanation
The reassembly subsystem has failed to allocate the memory needed to
activate reassembly on a connection.
Gateway Action
none
Recommended Action
Review configuration to reduce memory consumption.
Revision
1
Context Parameters
Connection
2.33.8. maximum_connections_limit_reached
(ID: 04800010)
Chapter 2. Log Message Reference
385
To Next Page
Loading...
