D-Link DFL-260E

ALG Session ID
Connection
2.1.82. illegal_command (ID: 00200219)
Default Severity
WARNING
Log Message
FTPALG: SITE EXEC from <peer> not allowed, rejecting command
Explanation
The client tried to issue a "SITE EXEC" command, which is not valid
since the client is not allowed to do this. The command will be
rejected.
Gateway Action
rejecting_command
Recommended Action
If the client should be allowed to do issue "SITE EXEC" commands,
modify the FTPALG configuration.
Revision
1
Parameters
peer
Context Parameters
ALG Module Name
ALG Session ID
Connection
2.1.83. illegal_direction1 (ID: 00200220)
Default Severity
WARNING
Log Message
FTPALG: Illegal direction for command(1), peer=<peer>. Closing
connection.
Explanation
A command was sent in an invalid direction, and the connection will
be closed.
Gateway Action
close
Recommended Action
None.
Revision
1
Parameters
peer
Context Parameters
ALG Module Name
ALG Session ID
Connection
2.1.84. illegal_direction2 (ID: 00200221)
Default Severity
WARNING
Log Message
FTPALG: Illegal direction for command(2), peer=<peer>. Closing
connection.
Explanation
A command was sent in an invalid direction, and the connection will
2.1.82. illegal_command (ID:
00200219)
Chapter 2. Log Message Reference
69