D-Link DFL-260E

reason
2.22.15. sequence_number_overflow (ID: 01800115)
Default Severity
NOTICE
Log Message
Source IP: <source_ip>, Destination IP: <dest_ip>, SPI: <spi>, Seq:
<seq>, Protocol: <protocol>, Reason: <reason>.
Explanation
An attempt to transmit a packet that would result in sequence number
overflow.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
source_ip
dest_ip
spi
seq
protocol
reason
2.22.16. bad_padding (ID: 01800116)
Default Severity
NOTICE
Log Message
Source IP: <source_ip>, Destination IP: <dest_ip>, SPI: <spi>, Seq:
<seq>, Protocol: <protocol>, Reason: <reason>.
Explanation
The received packet has incorrect padding.
Gateway Action
drop
Recommended Action
None.
Revision
1
Parameters
source_ip
dest_ip
spi
seq
protocol
reason
2.22.17. hardware_accelerator_congested (ID: 01800117)
Default Severity
NOTICE
Log Message
Source IP: <source_ip>, Destination IP: <dest_ip>, SPI: <spi>, Seq:
<seq>, Protocol: <protocol>, Reason: <reason>.
Explanation
Hardware accleration failed due to resource shortage.
2.22.15. sequence_number_overflow
(ID: 01800115)
Chapter 2. Log Message Reference
253