D-Link DFL-260E

protocol.
Gateway Action
VPN_tunnel_disabled
Recommended Action
Reconfigure_IPsec.
Revision
1
2.22.91. create_rules_failed (ID: 01802081)
Default Severity
ERROR
Log Message
Cannot insert this rule, the forced NAT protocol type does not match
rule protocol
Explanation
Failed to insert rule since forced NAT protocol do not match rule
protocol.
Gateway Action
VPN_tunnel_disabled
Recommended Action
Reconfigure_IPsec.
Revision
1
2.22.92. no_authentication_method_specified (ID:
01802100)
Default Severity
ERROR
Log Message
Neither pre-shared keys nor CA certificates nor EAP are specified for
a tunnel
Explanation
No authentication method is specified for the tunnel.
Gateway Action
VPN_tunnel_disabled
Recommended Action
Reconfigure_IPsec.
Revision
1
2.22.93. no_key_method_configured_for tunnel (ID:
01802102)
Default Severity
ERROR
Log Message
Tunnel does not specify any keying method (IKE or manual)
Explanation
No keying method (IKE/manual) is configured for tunnel.
Gateway Action
VPN_tunnel_disabled
Recommended Action
Reconfigure_IPsec.
Revision
1
2.22.91. create_rules_failed (ID:
01802081)
Chapter 2. Log Message Reference
276