Default Severity
WARNING
Log Message
<logcnt> messages lost due to throttling
Explanation
Due to extensive logging, a number of log messages was not sent.
Gateway Action
None
Recommended Action
Examine why the unit sent such a large amount of log messages. If this
is normal activity, the "LogSendPerSec" setting might be set too low.
Revision
1
Parameters
logcnt
2.42.14. log_messages_lost_due_to_log_buffer_exhaust
(ID: 03200401)
Default Severity
WARNING
Log Message
<logcnt> log messages lost due to log buffer exhaustion
Explanation
Due to extensive logging, a number of log messages was not sent.
Gateway Action
None
Recommended Action
Examine why the unit sent such a large amount of log messages. If this
is normal activity, the "LogSendPerSec" setting might be set too low.
Revision
1
Parameters
logcnt
2.42.15. ssl_encryption_failed (ID: 03200450)
Default Severity
ERROR
Log Message
Encryption failed.
Explanation
Encryption failed due to error. Connection closed.
Gateway Action
None
Recommended Action
None.
Revision
1
2.42.16. bidir_fail (ID: 03200600)
Default Severity
CRITICAL
Log Message
Failed to establish bi-directional communication with peer in
<timeout> seconds
Explanation
The unit failed to establish a connection back to peer, using the new
configuration. It will try to revert to the previous configuration file.
2.42.14. log_messages_lost_due_to_log_buffer_exhaust
(ID: 03200401)
Chapter 2. Log Message Reference
423
To Next Page
Loading...
