D-Link DFL-260E

Log Message
SMTPALG: Invalid end of mail "\\n.\\n" received.
Explanation
The client is sending invalid end of mail. Transaction will be
terminated.
Gateway Action
block
Recommended Action
Research how the client is sending invalid end of mail.
Revision
1
Parameters
sender_email_address
recipient_email_addresses
Context Parameters
ALG Module Name
ALG Session ID
2.1.61. dnsbl_init_error (ID: 00200177)
Default Severity
ERROR
Log Message
DNSbl internal error
Explanation
The email could not be checked for spam. Email will be processed
without spam checks.
Gateway Action
none
Recommended Action
None.
Revision
2
Context Parameters
ALG Module Name
ALG Session ID
2.1.62. cmd_too_long (ID: 00200179)
Default Severity
ERROR
Log Message
SMTPALG: Command line too long
Explanation
The SMTP Command line exceeds the maximum command length of
712 characters. (RFC 2821 Ch. 4.5.3.1 says 512).
Gateway Action
reject
Recommended Action
None.
Revision
2
Context Parameters
ALG Module Name
ALG Session ID
2.1.63. cmd_empty (ID: 00200180)
Default Severity
DEBUG
2.1.61. dnsbl_init_error (ID: 00200177) Chapter 2. Log Message Reference
61