D-Link DFL-260E

Parameters
index
name
unit
current_fanrpm
min_limit
max_limit
2.16.6. fanrpm_normal (ID: 04000032)
Default Severity
WARNING
Log Message
Fan RPM monitor <index> (<name>) is outside the specified limit.
Current value is <current_fanrpm> <unit>, lower limit is <min_limit>,
upper limit is <max_limit>
Explanation
The sensor reports that the fan rpm value is back in the normal range.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
index
name
unit
current_fanrpm
min_limit
max_limit
2.16.7. gpio_alarm (ID: 04000041)
Default Severity
WARNING
Log Message
GPIO monitor <index> (<name>) is outside the specified limit.
Current value is <current_gpio> <unit>, value is <current_gpio>
<unit>, lower limit is <min_limit>, upper limit is <max_limit>
Explanation
This varies depending on hardware model and what the GPIO is
connected to.
Gateway Action
none
Recommended Action
Depends on what the GPIO is connected to.
Revision
1
Parameters
index
name
unit
current_gpio
min_limit
max_limit
2.16.8. gpio_normal (ID: 04000042)
2.16.6. fanrpm_normal (ID: 04000032) Chapter 2. Log Message Reference
223