D-Link DFL-260E

Log Message
Unknown neighbor(IP:<neighbor> ID:<neighborid>) seen on <iface>.
Ignoring
Explanation
Unknown neighbor seen on PTP based interface.
Gateway Action
None
Recommended Action
Check for incorrectly configured neighbors.
Revision
1
Parameters
neighbor
neighborid
iface
Context Parameters
Rule Name
2.29.45. too_many_neighbors (ID: 02400201)
Default Severity
WARNING
Log Message
Too many neighbors on <iface>. Unable to maintain 2-way with all of
them(hello packet)
Explanation
There are too many OSPF routers on a directly connected network.
Gateway Action
None
Recommended Action
Reduce the number of OSPF routers on the network.
Revision
1
Parameters
iface
Context Parameters
Rule Name
2.29.46. neighbor_died (ID: 02400202)
Default Severity
WARNING
Log Message
Neighbor <neighbor> on <neighboriface> died
Explanation
Lost connectivity with neighbor router.
Gateway Action
None
Recommended Action
Check neighbor status and connectivity.
Revision
1
Parameters
neighbor
neighboriface
Context Parameters
Rule Name
2.29.47. unable_to_find_transport_area (ID: 02400300)
2.29.45. too_many_neighbors (ID:
02400201)
Chapter 2. Log Message Reference
357