Recommended Action
Verify that the RADIUS Accounting server is properly configured.
Revision
1
Context Parameters
User Authentication
2.48.12. failure_init_radius_accounting (ID: 03700012)
Default Severity
ALERT
Log Message
Failed to send Accounting Start to RADIUS Accounting Server.
Accounting will be disabled
Explanation
The unit failed to send an Accounting-Start event to the Accounting
Server. Accounting features will be disabled.
Gateway Action
accounting_disabled
Recommended Action
None.
Revision
1
Context Parameters
User Authentication
2.48.13. invalid_accounting_start_request (ID: 03700013)
Default Severity
WARNING
Log Message
Logging out the authenticated user, as a RADIUS Accounting START
request could not be sent to the RADIUS Accounting server
Explanation
The authenticated user is logged out as an Accounting-Start request
did not get sent to the Accounting Server. This could be a result of
missing a route from the unit to the Accounting Server.
Gateway Action
logout_user
Recommended Action
Verify that a route exists from the unit to the RADIUS Accounting
server, and that it is properly configured.
Revision
1
Context Parameters
User Authentication
2.48.14. no_accounting_start_server_response (ID:
03700014)
Default Severity
ALERT
Log Message
Did not send a RADIUS Accounting START request. Accounting has
been disabled
Explanation
The unit did not send an Accounting-Start event to the Accounting
Server. Accounting features will be disabled. This could be a result of
missing a route from the unit to the Accounting Server.
2.48.12. failure_init_radius_accounting
(ID: 03700012)
Chapter 2. Log Message Reference
464
To Next Page
Loading...
