2.48. USERAUTH
These log messages refer to the USERAUTH (User authentication (e.g. RADIUS) events)
category.
2.48.1. accounting_start (ID: 03700001)
Default Severity
INFORMATIONAL
Log Message
Successfully received RADIUS Accounting START response from
RADIUS Accounting server
Explanation
The unit received a valid response to an Accounting-Start event from
the Accounting Server.
Gateway Action
None
Recommended Action
None.
Revision
1
Context Parameters
User Authentication
2.48.2. invalid_accounting_start_server_response (ID:
03700002)
Default Severity
WARNING
Log Message
Received a RADIUS Accounting START response with an Identifier
mismatch. Ignoring this packet
Explanation
The unit received a response with an invalid Identifier mismatch. This
can be the result of a busy network, causing accounting event re-sends.
This will be ignored.
Gateway Action
ignore_packet
Recommended Action
None.
Revision
1
Context Parameters
User Authentication
2.48.3. no_accounting_start_server_response (ID:
03700003)
Default Severity
ALERT
Log Message
Did not receive a RADIUS Accounting START response. Accounting
has been disabled
Explanation
The unit did not receive a response to an Accounting-Start event from
the Accounting Server. Accounting features will be disabled.
Gateway Action
accounting_disabled
2.48. USERAUTH Chapter 2. Log Message Reference
460
To Next Page
Loading...
