D-Link DFL-260E

Log Message
Disable all IPsec tunnels
Explanation
Disable all IPsec tunnels due to memory limitations.
Gateway Action
disable_all_ipsec_interfaces
Recommended Action
None.
Revision
1
2.22.25. failed_create_audit_module (ID: 01800207)
Default Severity
ERROR
Log Message
Failed to create audit module.
Explanation
Failed to create audit module.
Gateway Action
IPsec_audit_disabled
Recommended Action
None.
Revision
1
2.22.26. failed_to_configure_IPsec (ID: 01800210)
Default Severity
CRITICAL
Log Message
Failed during configuration with error: <error_msg>
Explanation
Failed to set IPsec configuration.
Gateway Action
IPsec_configuration_disabled
Recommended Action
Reconfigure_IPsec.
Revision
1
Parameters
error_msg
2.22.27. reconfig_IPsec (ID: 01800211)
Default Severity
INFORMATIONAL
Log Message
Reconfiguration of IPsec started
Explanation
Reconfiguration of IPsec started.
Gateway Action
ipsec_reconfigured
Recommended Action
None.
Revision
2
2.22.28. IPsec_init_failed (ID: 01800213)
2.22.25. failed_create_audit_module
(ID: 01800207)
Chapter 2. Log Message Reference
256