D-Link DFL-260E

Gateway Action
close
Recommended Action
Decrease the maximum allowed SMTPALG sessions, or try to free
some of the RAM used.
Revision
2
Context Parameters
ALG Module Name
2.1.45. failed_connect_smtp_server (ID: 00200153)
Default Severity
ERROR
Log Message
SMTPALG: Failed to connect to the SMTP Server. Closing the
connection.
Explanation
The SMTP ALG could not connect to the receiving SMTP server,
resulting in that the ALG session could not be successfully opened.
Gateway Action
close
Recommended Action
None.
Revision
3
Context Parameters
ALG Module Name
ALG Session ID
2.1.46. invalid_server_response (ID: 00200155)
Default Severity
ERROR
Log Message
SMTPALG: Could not parse server response code
Explanation
The SMTP ALG failed to parse the SMTP response code from server.
Gateway Action
close
Recommended Action
If possible, verify response codes sent from server.
Revision
3
Context Parameters
Connection
ALG Module Name
ALG Session ID
2.1.47. sender_email_id_mismatched (ID: 00200156)
Default Severity
WARNING
Log Message
SMTPALG: Mismatching sender address
Explanation
The SMTP "MAIL FROM:" command does not match the "From:"
header. The e-mail will be tagged as spam.
Gateway Action
spam tag
2.1.45. failed_connect_smtp_server
(ID: 00200153)
Chapter 2. Log Message Reference
55