D-Link DFL-260E

Parameters
gateway
ipsectunnel
2.22.38. failed_to_add_rules (ID: 01800313)
Default Severity
ERROR
Log Message
Failed to add rules after remote gw: <gateway> have been resolved by
DNS for IPsec tunnel: <ipsectunnel>
Explanation
Failed to add rules to tunnel after remote gateway have been resolved
by DNS.
Gateway Action
IPsec_tunnel_disabled
Recommended Action
None.
Revision
1
Parameters
gateway
ipsectunnel
2.22.39. failed_to_add_rules (ID: 01800314)
Default Severity
ERROR
Log Message
Failed to commit rules after remote gw: <gateway> have been resolved
by DNS for IPsec tunnel: <ipsectunnel>
Explanation
Failed to add rules to tunnel after remote gateway have been resolved
by DNS.
Gateway Action
IPsec_tunnel_disabled
Recommended Action
None.
Revision
1
Parameters
gateway
ipsectunnel
2.22.40. new_remote_gw_ip (ID: 01800315)
Default Severity
INFORMATIONAL
Log Message
Resolved remote-gateway <gateway> to IP <ip> for IPsec tunnel
<ipsectunnel>
Explanation
Tunnel have succesfully been reconfigured after remote gateway have
been resolved.
Gateway Action
None
Recommended Action
None.
Revision
1
2.22.38. failed_to_add_rules (ID:
01800313)
Chapter 2. Log Message Reference
260