EasyManua.ls Logo

D-Link DFL-260E

D-Link DFL-260E
486 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Default Severity
NOTICE
Log Message
TCP acknowledgement <ack> is not in the acceptable range
<accstart>-<accend>. Dropping
Explanation
A TCP segment with an unacceptable acknowledgement number was
received during state SYN_SENT. The packet will be dropped.
Gateway Action
drop
Recommended Action
None.
Revision
1
Parameters
ack
accstart
accend
Context Parameters
Rule Name
Connection
Packet Buffer
2.43.15. rst_without_ack (ID: 03300018)
Default Severity
NOTICE
Log Message
TCP RST segment without ACK during state SYN_SENT. Dropping
Explanation
A TCP segment with the RST flag but not the ACK flag was received
during state SYN_SENT. The packet will be dropped.
Gateway Action
drop
Recommended Action
None.
Revision
1
Context Parameters
Rule Name
Connection
Packet Buffer
2.43.16. tcp_seqno_too_high (ID: 03300019)
Default Severity
WARNING
Log Message
TCP sequence number <seqno> is not in the acceptable range
<accstart>-<accend>. Dropping
Explanation
A TCP segment with an unacceptable sequence number was received.
The packet will be dropped.
Gateway Action
drop
Recommended Action
None.
Revision
1
2.43.15. rst_without_ack (ID:
03300018)
Chapter 2. Log Message Reference
439

Table of Contents

Other manuals for D-Link DFL-260E

Related product manuals