D-Link DFL-260E

Log Message
TFTPALG: Received bytes <received> exceeding allowed max value
<maxvalue>
Explanation
Transferred bytes exceeding allowed value.Closing connection.
Gateway Action
close
Recommended Action
If connection should be allowed modify the filetransfersize option of
the TFTP Alg configuration .
Revision
1
Parameters
received
maxvalue
Context Parameters
ALG Module Name
ALG Session ID
Connection
2.1.149. options_removed (ID: 00200371)
Default Severity
WARNING
Log Message
TFTPALG: Options not allowed. Stripping options from packet
Explanation
Options not allowed. Stripping options from packet.
Gateway Action
rewrite
Recommended Action
If options should be allowed modify the TFTP Alg configuration.
Revision
1
Context Parameters
ALG Module Name
ALG Session ID
Connection
2.1.150. failed_strip_option (ID: 00200372)
Default Severity
ERROR
Log Message
TFTPALG: Failed to strip options , (internal error)
Explanation
An attempt to send request packet without options failed because of an
internal error.
Gateway Action
close
Recommended Action
None.
Revision
1
Context Parameters
ALG Module Name
2.1.151. failed_create_connection (ID: 00200373)
2.1.149. options_removed (ID:
00200371)
Chapter 2. Log Message Reference
94