Recommended Action
Issue the "memory" CLI command and check for modules with
abnormal memory consumption. Otherwise, revise configuration in
order to free more RAM.
Revision
1
2.18.4. idp_piped_state_replaced (ID: 06100004)
Default Severity
DEBUG
Log Message
Replaced IDP pipe host entry <replaced_host>
Explanation
An old dynamic pipe entry was removed and replaced since the
maximum number of pipe states were reached.
Gateway Action
state_replaced
Recommended Action
None.
Revision
1
Parameters
replaced_host
old_host_ttl
2.18.5. idp_piped_state_expire (ID: 06100005)
Default Severity
DEBUG
Log Message
Removed IDP dynamic pipe state for host <host> due to TTL expire
Explanation
An old dynamic pipe entry was removed since its TTL expired.
Connections to and from this host are no longer piped.
Gateway Action
state_removed
Recommended Action
None.
Revision
1
Parameters
host
2.18.6. conn_idp_unpiped (ID: 06100006)
Default Severity
NOTICE
Log Message
IDP Pipe disabled. Throughput no longer limited to <limit>
Explanation
A configuration change regarding the dynamic pipes' throughput
parameters have occured. The dynamic piping for this connection is
disabled.
Gateway Action
pipe_removed
Recommended Action
None.
Revision
1
2.18.4. idp_piped_state_replaced (ID:
06100004)
Chapter 2. Log Message Reference
235
To Next Page
Loading...
