2.1.157. blocked_filetype (ID: 00200384)
Default Severity
NOTICE
Log Message
POP3ALG: Requested file:<filename> is blocked as this file is
identified as type <filetype>, which is in block list.
Explanation
The file is present in the block list. It will be blocked as per
configuration.
Gateway Action
block
Recommended Action
If this file should be allowed, update the ALLOW/BLOCK list.
Revision
1
Parameters
filename
filetype
sender_email_address
Context Parameters
ALG Module Name
ALG Session ID
2.1.158. response_blocked_unknown (ID: 00200385)
Default Severity
WARNING
Log Message
POP3ALG: Response blocked.Invalid response=<response>
Explanation
The server is sending unknown response. The response will be
blocked.
Gateway Action
block
Recommended Action
None.
Revision
1
Parameters
command"
response
Context Parameters
ALG Module Name
ALG Session ID
2.1.159. base64_decode_failed (ID: 00200386)
Default Severity
ERROR
Log Message
POP3ALG: Base 64 decode failed. Attachment blocked
Explanation
The data sent to Base64 decoding failed. This can occur if the email
sender sends incorrectly formatted data. The attachment has been
blocked.
Gateway Action
block_data
Recommended Action
Research how the sender is encoding the data.
2.1.157. blocked_filetype (ID:
00200384)
Chapter 2. Log Message Reference
97
To Next Page
Loading...
