EasyManua.ls Logo

D-Link DFL-260E

D-Link DFL-260E
486 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Parameters
remotepeer
2.22.68. sa_write_congestion (ID: 01801337)
Default Severity
INFORMATIONAL
Log Message
Failed to write SA to Nitrox II due to congestion. <dir> SPI <spi>
Explanation
There was not enough free buffers to write the SA to Nitrox II. Every
new packet on the SA will trigger a new try.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
dir
spi
2.22.69. sa_write_congestion (ID: 01801338)
Default Severity
WARNING
Log Message
Failed to write SA to Nitrox II; the request timed out. <dir> SPI <spi>
Explanation
A request to write an SA to Nitrox II timed out\r\n.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
dir
spi
2.22.70. trigger_non_ip_packet (ID: 01802001)
Default Severity
WARNING
Log Message
Trigger for non-IP packet of protocol <proto>. Dropping request for
policy
Explanation
Trigger for non IP packet, dropping request.
Gateway Action
dropping_request
Recommended Action
None.
Revision
1
Parameters
proto
2.22.71. rule_not_active (ID: 01802002)
2.22.68. sa_write_congestion (ID:
01801337)
Chapter 2. Log Message Reference
269

Table of Contents

Other manuals for D-Link DFL-260E

Related product manuals