D-Link DFL-260E

Recommended Action
None.
Revision
1
2.22.98. invalid_rule_setting (ID: 01802108)
Default Severity
ERROR
Log Message
No from-tunnel specified for an AUTHENTICATION-ONLY rule
Explanation
From-tunnel must be specified for an AUTHENTICATION-ONLY
rule.
Gateway Action
None
Recommended Action
None.
Revision
1
2.22.99. invalid_rule_setting (ID: 01802109)
Default Severity
ERROR
Log Message
To-tunnel specified for an AUTHENTICATION-ONLY rule
Explanation
To-tunnel can not be specified for an AUTHENTICATION-ONLY
rule.
Gateway Action
None
Recommended Action
None.
Revision
1
2.22.100. max_number_of_policy_rules_reached (ID:
01802110)
Default Severity
CRITICAL
Log Message
The maximum number of policy rules reached
Explanation
The maximum number of policy rules reached.
Gateway Action
VPN_configuration_disabled
Recommended Action
Review the advanced setting IPsecMaxRules.
Revision
2
2.22.101. suspicious_outbound_rule (ID: 01802114)
Default Severity
ERROR
2.22.98. invalid_rule_setting (ID:
01802108)
Chapter 2. Log Message Reference
278