D-Link DFL-260E

Default Severity
ERROR
Log Message
TFTPALG: Failed to create listening connection,internal
error(<error_code>). Closing session
Explanation
The unit failed to create listening connection, resulting in that the ALG
session could not be successfully opened.
Gateway Action
close
Recommended Action
None.
Revision
1
Parameters
error_code
Context Parameters
ALG Module Name
2.1.152. invalid_error_message_received (ID: 00200374)
Default Severity
WARNING
Log Message
TFTPALG: Received invalid error message Opcode <opcode> Packet
length <packet_length>
Explanation
Received invalid error message.Closing connection.
Gateway Action
close
Recommended Action
None.
Revision
1
Parameters
opcode
packet_length
Context Parameters
ALG Module Name
ALG Session ID
Connection
2.1.153. max_pop3_sessions_reached (ID: 00200380)
Default Severity
WARNING
Log Message
POP3ALG: Maximum number of POP3 sessions (<max_sessions>)
for service reached. Closing connection
Explanation
The maximum number of concurrent POP3 sessions has been reached
for this service. No more sessions can be opened before old sessions
have been released.
Gateway Action
close
Recommended Action
If the maximum number of POP3 sessions is too low, increase it.
Revision
1
Parameters
max_sessions
2.1.152. invalid_error_message_received
(ID: 00200374)
Chapter 2. Log Message Reference
95