Revision
1
Parameters
peer
Context Parameters
ALG Module Name
ALG Session ID
Connection
2.1.75. illegal_command (ID: 00200212)
Default Severity
WARNING
Log Message
FTPALG:
Failed
to
parse
command
from
<peer>
as
a
FTP
command.
String=<string>. Closing connection
Explanation
An invalid command was received on the control channel. This is not
allowed, and the connection will be closed.
Gateway Action
close
Recommended Action
If unknown commands should be allowed, modify the FTPALG
configuration.
Revision
1
Parameters
peer
string
Context Parameters
ALG Module Name
ALG Session ID
Connection
2.1.76. illegal_command (ID: 00200213)
Default Severity
WARNING
Log Message
FTPALG:
Failed
to
parse
command
from
<peer>
as
a
FTP
command.
String=<string>. Rejecting command
Explanation
An invalid command was received on the control channel. This is
allowed, but the command will be rejected as it is not understood.
Gateway Action
rejecting_command
Recommended Action
If unknown commands should not be allowed, modify the FTPALG
configuration.
Revision
1
Parameters
peer
string
Context Parameters
ALG Module Name
ALG Session ID
Connection
2.1.77. port_command_disabled (ID: 00200214)
2.1.75. illegal_command (ID:
00200212)
Chapter 2. Log Message Reference
66
To Next Page
Loading...
