D-Link DFL-260E

specified that no such data should be sent.
Gateway Action
closing_connecion
Recommended Action
Research the source of this, and try to find out why the client is
sending an invalid request.
Revision
1
Parameters
algname
Context Parameters
ALG Module Name
ALG Session ID
2.1.8. suspicious_data_received (ID: 00200106)
Default Severity
WARNING
Log Message
HTTPALG: Too much suspicious data has been received from the
server. Closing the connection. ALG name: <algname>.
Explanation
The unit is configured to do content blocking, but the data from the
server contains too much suspicious data. The unit can not properly
determin if this data is a valid or if it should be blocked.
Gateway Action
closing_connecion
Recommended Action
Research the source of this, and try to find out why the server is
sending such large amounts of suspicious data.
Revision
1
Parameters
algname
Context Parameters
ALG Module Name
ALG Session ID
2.1.9. invalid_chunked_encoding (ID: 00200107)
Default Severity
WARNING
Log Message
HTTPALG: The server sent invalid chunked encoding. Closing
connection. ALG name: <algname>.
Explanation
The data received from the server was sent in chunked mode, but it
was not properly formatted.
Gateway Action
closing_connecion
Recommended Action
Research the source of this, and try to find out why the server is
sending invalid formatted chunked data.
Revision
1
Parameters
algname
Context Parameters
ALG Module Name
ALG Session ID
2.1.8. suspicious_data_received (ID:
00200106)
Chapter 2. Log Message Reference
41