D-Link DFL-260E

Default Severity
WARNING
Log Message
Unable to find transport area <area> for VLINK <vlink> when
building router LSA. Iface skipped
Explanation
Unable to find transport area for a vlink.
Gateway Action
skip_iface
Recommended Action
Check OSPF area configuration.
Revision
1
Parameters
area
vlink
Context Parameters
Rule Name
2.29.48. internal_error_unable_to_map_identifier (ID:
02400301)
Default Severity
WARNING
Log Message
Internal error: Unable to map a identifier for LSA Type:<lsatype>
ID:<lsaid> AdvRouter:<lsaadvrtr>
Explanation
Unable to map an identifier for a LSA.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
lsatype
lsaid
lsaadvrtr
Context Parameters
Rule Name
2.29.49. lsa_size_too_big (ID: 02400302)
Default Severity
WARNING
Log Message
Requested LSA size(<lsasize>) too big. Unable to create LSA
Explanation
Unable to create LSA since the size is too big.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
lsasize
Context Parameters
Rule Name
2.29.48. internal_error_unable_to_map_identifier
(ID: 02400301)
Chapter 2. Log Message Reference
358