2.12. DYNROUTING
These log messages refer to the DYNROUTING (Dynamic routing) category.
2.12.1. failed_to_export_route_to_ospf_process_failed_to_alloc
(ID: 01100001)
Default Severity
CRITICAL
Log Message
Failed to export route to OSPF process (unable to alloc export node)
Explanation
Unable to export route to a OSPF process since out of memory.
Gateway Action
alert
Recommended Action
Check memory consumption.
Revision
1
Context Parameters
Dynamic Route
Rule Name
Route
2.12.2. route_exported_to_ospf_as (ID: 01100002)
Default Severity
NOTICE
Log Message
Route exported to OSPF AS
Explanation
A route was just exported to a OSPF AS.
Gateway Action
None
Recommended Action
None.
Revision
1
Context Parameters
Dynamic Route
Rule Name
Route
2.12.3. route_unexported_from_ospf_as (ID: 01100003)
Default Severity
NOTICE
Log Message
Route unexported from OSPF AS
Explanation
A route was just unexported from a OSPF AS.
Gateway Action
None
Recommended Action
None.
Revision
1
2.12. DYNROUTING Chapter 2. Log Message Reference
194
To Next Page
Loading...
