D-Link DFL-260E

2.17.11. idp_evasion (ID: 01300011)
Default Severity
ERROR
Log Message
Failed to reassemble data. ID Rule: <idrule>. Source IP: <srcip>.
Source Port: <srcport>. Destination IP: <destip>. Destination Port:
<destport>. Closing connection.
Explanation
The unit failed to reassemble data. The reason for this is problaby due
to an IDP engine evasion attack.
Gateway Action
close
Recommended Action
None.
Revision
1
Parameters
idrule
srcip
srcport
destip
destport
Context Parameters
Rule Name
2.17.12. idp_evasion (ID: 01300012)
Default Severity
ERROR
Log Message
Failed to reassemble data. ID Rule: <idrule>. Source IP: <srcip>.
Source Port: <srcport>. Destination IP: <destip>. Destination Port:
<destport>.
Explanation
The unit failed to reassemble data. The reason for this is problaby due
to an IDP engine evasion attack.
Gateway Action
ignore
Recommended Action
None.
Revision
1
Parameters
idrule
srcip
srcport
destip
destport
Context Parameters
Rule Name
2.17.13. idp_outofmem (ID: 01300013)
Default Severity
ERROR
Log Message
Failed to scan data. ID Rule: <idrule>. Source IP: <srcip>. Source
Port: <srcport>. Destination IP: <destip>. Destination Port:
2.17.11. idp_evasion (ID: 01300011) Chapter 2. Log Message Reference
231