2.1.105. failed_to_send_command (ID: 00200251)
Default Severity
NOTICE
Log Message
FTPALG:Failed to send the command.
Explanation
The command sent by the ALG to the server could not be sent.
Gateway Action
none
Recommended Action
None.
Revision
1
Context Parameters
ALG Module Name
2.1.106. resumed_compressed_file_transfer (ID: 00200252)
Default Severity
WARNING
Log Message
FTPALG: The file <filename> (File type: <filetype> ) cannot be sent
to antivirus scan engine.
Explanation
The data cannot be sent to AVSE for scanning since file transfer
begins from within the middle of the file. The scanning process will
fail for compressed files.
Gateway Action
data_blocked_control_and_data_channel_closed
Recommended Action
Change fail mode setting to allow, if resumed file transfers of
compressed files should be allowed.
Revision
2
Parameters
filename
filetype
Context Parameters
ALG Module Name
ALG Session ID
2.1.107. blocked_filetype (ID: 00200253)
Default Severity
NOTICE
Log Message
FTPALG: Requested file:<filename> is blocked as this file is
identified as type <filetype>, which is in block list.
Explanation
The file is present in the block list. It will be blocked as per
configuration.
Gateway Action
data_blocked_control_and_data_channel_closed
Recommended Action
If this file should be allowed, update the ALLOW/BLOCK list.
Revision
2
Parameters
filename
2.1.105. failed_to_send_command (ID:
00200251)
Chapter 2. Log Message Reference
78
To Next Page
Loading...
