EasyManua.ls Logo

D-Link DFL-260E

D-Link DFL-260E
486 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Revision
1
Parameters
maxtunnels
2.22.75. ike_sa_failed (ID: 01802022)
Default Severity
WARNING
Log Message
Ike SA negotiation failed: <statusmsg> Local IKE peer: <local_peer>
Remote IKE peer: <remote_peer> Initiator SPI: <initiator_spi>.
Explanation
Negotiation of IKE SA failed.
Gateway Action
no_ike_sa
Recommended Action
None.
Revision
2
Parameters
statusmsg
local_peer
remote_peer
initiator_spi
2.22.76. ike_sa_negotiation_completed (ID: 01802024)
Default Severity
INFORMATIONAL
Log Message
IKE SA <options> negotiation completed: <mode> using <auth>
(<encryption><keysize> - <hash>) Diffie-Hellman group <dhgroup>
(<bits>) Lifetime: <lifetime> seconds
Explanation
Negotiation of IKE SA completed.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
options
mode
auth
encryption
keysize
hash
dhgroup
bits
lifetime
2.22.77. ike_sa_negotiation_failed (ID: 01802030)
Default Severity
INFORMATIONAL
Log Message
No IKE SA negotiations done. Reason: The authentication credentials
were not specified or private key was not available
2.22.75. ike_sa_failed (ID: 01802022) Chapter 2. Log Message Reference
271

Table of Contents

Other manuals for D-Link DFL-260E

Related product manuals