EasyManua.ls Logo

D-Link DFL-260E

D-Link DFL-260E
486 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Gateway Action
rewrite
Recommended Action
None.
Revision
1
Context Parameters
Rule Name
Packet Buffer
2.47.7. enet_hw_sender_multicast (ID: 04400416)
Default Severity
WARNING
Log Message
Ethernet hardware sender is a multicast address. Dropping.
Explanation
The Ethernet hardware sender address is a multicast address. The
packet will be dropped.
Gateway Action
drop
Recommended Action
Investigate if there are equipment sending packets using a multicast
address as sender MAC address. If there are, try to change the
behaviour of that equipment.
Revision
1
Context Parameters
Rule Name
Packet Buffer
2.47.8. relay_stp_frame (ID: 04400417)
Default Severity
INFORMATIONAL
Log Message
Relaying STP frame from <recvif> to switched interfaces
Explanation
An incomming STP frame has been relayed to all switched interfaces
in the same switch route as [recif].
Gateway Action
allow
Recommended Action
None.
Revision
1
Parameters
recvif
2.47.9. dropped_stp_frame (ID: 04400418)
Default Severity
INFORMATIONAL
Log Message
Dropping STP frame from <recvif>
Explanation
An incomming STP frame has been dropped.
Gateway Action
drop
2.47.7. enet_hw_sender_multicast (ID:
04400416)
Chapter 2. Log Message Reference
457

Table of Contents

Other manuals for D-Link DFL-260E

Related product manuals