D-Link DFL-260E

2.22.133. could_not_decode_crl (ID: 01802610)
Default Severity
WARNING
Log Message
Could not decode CRL. The certificate may be corrupted or it was
given in unrecognized format. File format may be wrong
Explanation
Could_not_decode_CRL.
Gateway Action
certificate_invalid
Recommended Action
None.
Revision
1
2.22.134. ike_sa_negotiation_completed (ID: 01802703)
Default Severity
INFORMATIONAL
Log Message
IKE SA: Local IKE peer: <local_peer> Remote IKE peer:
<remote_peer> Initiator SPI: <initiator_spi> Responder SPI:
<responder_spi>. Internal severity level: <int_severity>.
Explanation
Ike SA sucessfully installed.
Gateway Action
ike_sa_completed
Recommended Action
None.
Revision
1
Parameters
local_peer
remote_peer
initiator_spi
responder_spi
int_severity
2.22.135. ike_sa_negotiation_completed (ID: 01802704)
Default Severity
INFORMATIONAL
Log Message
IKE SA: Local IKE peer: <local_peer> Remote IKE peer:
<remote_peer>. Internal severity level: <int_severity>
Explanation
Ike SA sucessfully installed.
Gateway Action
ike_sa_completed
Recommended Action
None.
Revision
1
Parameters
local_peer
remote_peer
int_severity
2.22.134. ike_sa_negotiation_completed
(ID: 01802703)
Chapter 2. Log Message Reference
288