D-Link DFL-260E

Recommended Action
None.
Revision
1
Parameters
maxclients
client
2.40.17. client_disallowed (ID: 04700061)
Default Severity
WARNING
Log Message
Client <client> not allowed access according to the "remotes" section.
Explanation
The client is not allowed access to the SSH server. Closing connection.
Gateway Action
close
Recommended Action
If this client should be granted SSH access, add it in the "remotes"
section.
Revision
1
Parameters
client
2.40.18. ssh_force_conn_close (ID: 04700105)
Default Severity
NOTICE
Log Message
SSH connection is no longer valid. Client: <client>, closing
connection
Explanation
The SSH connection is no longer valid. The might be a result of a
"remotes" object being changed to no longer allow the SSH
connection. Closing connection.
Gateway Action
close
Recommended Action
None.
Revision
1
Parameters
client
2.40.19. scp_failed_not_admin (ID: 04704000)
Default Severity
NOTICE
Log Message
Administrator access could not set for session from this ip: <ip>
Explanation
SCP transfers can only be used if sessions has administrator access.
Closing connection.
Gateway Action
close
Recommended Action
If there are other active administrator session, they might preventing
this session from gaining administrator access.
2.40.17. client_disallowed (ID:
04700061)
Chapter 2. Log Message Reference
414