D-Link DFL-260E

Default Severity
CRITICAL
Log Message
HTTPALG: Failed to connect to web content servers
Explanation
Web Content Filtering was unable to connect to the Web Content
Filtering servers. Verify that the unit has been configured with Internet
access.
Gateway Action
none
Recommended Action
Check_configuration.
Revision
2
Context Parameters
ALG Module Name
2.1.22. wcf_srv_connection_error (ID: 00200120)
Default Severity
ERROR
Log Message
HTTPALG: HTTP request not validated by Web Content Filter and
allowed.
Explanation
The Web Content Filtering servers could not be contacted. The request
has been allowed since fail-mode parameter is in allow mode.
Gateway Action
allow
Recommended Action
Investigate why the Web Content Filtering servers cannot be reached.
Revision
1
Parameters
algname
Context Parameters
ALG Module Name
ALG Session ID
2.1.23. wcf_server_unreachable (ID: 00200121)
Default Severity
ERROR
Log Message
HTTPALG: Failed to connect to web content server <failedserver>
Explanation
Web Content Filtering was unable to connect to the Web Content
Filtering server. The system will try to contact one of the backup
servers.
Gateway Action
switching_server
Recommended Action
None.
Revision
1
Parameters
failedserver
Context Parameters
ALG Module Name
2.1.22. wcf_srv_connection_error (ID:
00200120)
Chapter 2. Log Message Reference
46