D-Link DFL-260E

Recommended Action
Make sure the userauth rules are configured correctly.
Revision
1
Parameters
tunnelid
sessionid
2.27.13. l2tp_session_request (ID: 02800015)
Default Severity
NOTICE
Log Message
L2TP session request received. Tunnel ID: <tunnelid>
Explanation
A new session request was received on the specified tunnel.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
tunnelid
2.27.14. l2tp_session_up (ID: 02800016)
Default Severity
NOTICE
Log Message
L2TP session up. Tunnel ID: <tunnelid>, Session ID: <sessionid>,
User: <user>, Auth: <auth>, MPPE: <mppe>, Assigned IP:
<assigned_ip>
Explanation
The L2TP session negotiation has completed successfully.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
tunnelid
sessionid
user
auth
mppe
assigned_ip
2.27.15. failure_init_radius_accounting (ID: 02800017)
Default Severity
WARNING
Log Message
Failed to send Accounting Start to RADIUS Accounting Server.
Accounting will be disabled
Explanation
Failed to send START message to RADIUS accounting server.
RADIUS accounting will be disabled for this session.
2.27.13. l2tp_session_request (ID:
02800015)
Chapter 2. Log Message Reference
334